| danil | Дата: Вторник, 17.04.2012, 16:49 | Сообщение # 1 |
|
Рядовой
Группа: Администраторы
Сообщений: 18
Статус: Offline
| GTabCombOver (Android 3.0)
Honeycomb.
Не работает датчик света, камера и 3g.
Инструкция
качаешь это (ТЫК)http://forum.xda-developers.com/showthread.php?t=1424963 Please post issues in the GTabCombOver Q&A Thread.
GTabCombOver is an improved version of GTabComb, a Honeycomb 3.0.1 ROM by zyhong. It is a G Tablet ROM, but people have reported that it works with the Hannspad and the ZPad T2 as well. Here are zyhong's original instructions:
STANDARD DISCLAIMER: USE AT YOUR OWN RISK. By running this firmware mod, you agree that there is the possibility that you may brick your device and neither myself, XDA nor Viewsonic are responsible for supporting you if that occurs. In this case, it is required that you learn and setup nvflash prior to running this mod.
This is a port of AdamComb with pershoot kernel and some tweak for performance and usability. Thanks all the greatest Adam, Vegan, Gtab devs that make this rom possible.
Install instruction:
1. Make sure the version of your bootloader and download the corresponding rom
2. I guess most of you should already be in CWM, but if you are not. update the recovery to CWM first. Stock recovery might work but you need to do some work and CWM is much better anyway.
3. Wipe data / Factory reset. It might work well, but you will most likely have problems without doing this.
4. Using the "install from sdcard" to install and enjoy.
английская версия
русская версия
1)скачали ссылку выше
2)качаем на карточку
3)делаем вайпы
4)прошиваемся
5)делаем вайпы
6)загружаемся
7)ребутимся
8)делаем вайпы
9)настраиваем базовые настройки планшета
--------------------------------------------------
ВСЕ!
-------------------------------------------
Заводим маркет:
1)пробуем подключить маркет через wi-fi
2)вырубаем сеть
3)врубаем сеть
4)пробуем коннектить
5)все
|
| |
| |
